Standard Features - All Models
- Bumper with built in rubber mounted lights
- Inside - outside controls
- Inside air
- Front and rear container locks
- Independent - reeving cylinders
- Reeving cylinder rod guards
- Hydraulic tubing with J.I.C. fittings
- All sheaves & rollers have bronze bearings & greasable
- ICC underride bumper on "I/O" & "OR" models
Chassis Requirements - All Models
| Minimum GAWR front axle | 18,000 lbs | | Minimum GAWR rear axle | 44,000 lbs | | Minimum GVWR | 62,000 lbs | Frame Specifications- Outside Rail | Model & C/T | HH174OR-6 | HH182OR-6 | HH194OR-6 | | Overall length | 277" | 285 1/2" | 297 1/2" | | Overall height frame raised | 211" | 217" | 225" | | Gross weight approx. | 6630 lbs. | 6690 lbs. | 7080 lbs. | Frame Specifications- Inside/Outside Rail | Model & C/T | HH174I/O-6 | HH182I/O-6 | HH194I/O-6 | | Overall length | 277" | 285 1/2" | 297 1/2" | | Overall height frame raised | 211" | 217" | 225" | | Gross weight approx. | 7050 lbs. | 7100 lbs. | 7450 lbs. | Frame Specifications- Extendible Tail | Model & C/T | HH174ET-6 | HH182ET-6 | HH194ET-6 | | Overall length | 277" | 285 1/2" | 297 1/2" | | Overall height frame raised | 211" | 217" | 225" | | Gross weight approx. | 6630 lbs. | 6690 lbs. | 7100 lbs. | Frame Specifications- Dead Lift | Model & C/T | HH156DL-6 | HH182DL-6 | HH194DL-6 | | Overall length | 258" | 277" | 297 1/2" | | Overall height frame raised | 198" | 211" | 226" | | Gross weight approx. | 6150 lbs. | 6600 lbs. | 7450 lbs. | Hydraulic Specifications- All Models | Pump type | Gear | | Maximum operating pressure | 2,500 PSI | | Working RPM (approximate) | 1,200 RPM | | GPM at working RPM (approximate) | 290 GPM | | Oil tank capacity | 48 Gallons | | Oil system gross capacity | 70 Gallons | | Filter | 10 micron return line | | Valve type | sectional body | Cylinder Operating Times - (Approximate) | Container on | 40 seconds | | Container off | 23 seconds | | Tilt up | 39 seconds | | Tilt down | 21 seconds | Construction Specifications | Model | 156-174-180 C/T | 194 C/T | | Main frame | 4x8x1/2 A500 tubing / 4x8x3/8" "ET" Model | | Sub frame | 3x2x1/4" A500 tubing | | Reeving cylinders (2) | 6x4x80" | 6x4x90" | | Tilt cylinders (2) | 6x4x76-1/2" | 6x5x4x118" | | Cylinder rods | Chrome plated | | Tilt cylinder shaft (lower) | 3" dia. (solid) | 2 1/2" dia. (solid) | | Tilt cylinder shaft (upper) | 2 1/2" dia. (solid) | 2 1/2" dia. (solid) | | Cable sheaves | 10" diameter w aluminum/bronze bushings | | Cable length & diameter | 71' x 7/8" EXIWRC | 78' x 7/8" EXIWRC | | Side rollers (10) | 4" O.D. with 2" bronze bushing bearings | Available Options - Fenders
- Fold down auxiliary stops
- Hinged reeving cylinder covers
- Tool box
- Auxiliary wet kit
- Air controls
- Cab guard
- Heavy duty bumper with lights
- Special hoist
- Tail cylinder guard on "ET" models
- Lift axles
- Worklights
- Heavy duty hinge
- Fold-up bumper
| 
