Test Drive an Ademco Panel

Test Drive an Ademco Panelusing Shockwave by Macromedia :

If you do not have the Shockwave Plug-in,you can download one here,or you can press your "SHIFT" key and click here.

NOTE: This Demo requires a web browser of Version 3.0 or higher (MIE 3.0; Navigator 3.0).

The security code for the panel below is1234

The AdemcoPanel above is from the Ademco Website at: http://www.ademco.com/ademco/keypad.htm

The commands for Ademco panels are generic:

ARMING AWAY - Your Code + AWAY(1234+2) - Use this when you're leaving your home or business, andno one else is there. The entire security system is activated.

DISARMING - Your Code + OFF (1234+1)- Turns off protection. It doesn't affect any fire protection you have,which is always on.

ARMING STAY - Your Code + STAY (1234+3)- Use this when you're home, but others in the family are not. It turnsoff inside motion detectors (so you can walk around), but your home isprotected against an entry from the outside. Late arrivals have to disarmthe system upon entering.

ARMING INSTANT - Your Code + Instant(1234+ 7) - Use this when everyone is in for the night. Again, youcan walk around inside, but opening any protected door or window will causean immediate alarm.

Open and close the door and window by clickingon them with the left mouse button.

ENTRY/EXIT TIME: After you arm yoursystem, you usually have around 30-45 seconds to leave thehouse before it's "All Secure". When you come back - you also have sometime to turn off the system before the alarm sounds. In thisdemo, the entry/exit time is set at 10 seconds... just to keep thingsmoving.

Here's A Shortcut! - UsingQuickarm, you can arm the system without entering your code. Just enterthe pound (#) key and the arming function of your choice (Away, Stay, Instant).

PANIC: The keys on the left of yourkeypad let you call for help in case of a police, fire or medical
emergency. The key must be held down for3 seconds for an emergency signal to be sent.. By the way, to activatethe demo panic keys - hold your left mouse button down for 3 seconds.

OTHER STUFF

BYPASS - Your Code + 6 + Zone (1234-6-02bypasses zone 2) - This temporarily removes a
protected point from the system, like a bedroomwindow on a hot night. Here's another way to bypass: open thewindow and enter your code and the bypass key (1234+6). The open windowis automatically bypassed.

CHIME - Your Code + Chime (1234-9)- The system notifies you with a beep when a protected
door or window is opened. To turn Chime off,enter Your Code + Chime (1234-9).

THINGS TO TRY
When you arm the system AWAY (1234+2)

- after 10 seconds, the system is "ALLSECURE". Try opening the bedroom window. You will see it trigger the alarm.You can turn the alarm off with 1234+1.

-Arm the system AWAY again. Wait for "ALLSECURE" Now open the front door. You now have time to disarm the systembefore the alarm sounds.

[Backto Main]

Comments? Email kbreaks@valleyalarms.com

- | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |