The Bes-Pac BPE-200 2 yd. represents quality, value and economy in one unit.  Manufactured with 3/16" H.R. sides and reinforced with structural channel and angle, the BPE-200 performs with over 42,000 PSI of packing force at normal pressures.  Utilizing Bes-Pac's exclusive Ram Guide System this unit provides maximum performance efficiency and unequaled value.

	Standard	Metric
Specifications
MFG Rating	2 yd3	1.52m3
WASTEC Rating	1.57 yd3	1.20m3
Clear top opening (L x W)	42.5 x 57.5"	1079mm x 1460mm
Ram Face (H x W)	28" x 60"	711mm x 1524mm
Ground Height	15 1/2"	394mm
Capacity per Hour	129 yd3	99 m3
Performance
Cycle Time	56 sec.	56 sec.
Normal Force	42,400 lbs	188 kN
Maximum Force	48,100 lbs	214 kN
Normal Ram Face Pressure	25.3 PSI	174 kPa
Maximum Ram Face Pressure	33.7 PSI	232 kPa
Ram Penetration	13.5"	343 mm
Electrical
Motor	10 HP	7.5kW
Control Voltage	120 VAC	120 VAC
UL Label All Circuits Fused, Keylock, Start, Stop, and Reverse
Hydraulic
Pump Regen	13.9 GPM	52 LPM
Normal System Pressure	1,500 PSI	10 mPa
Maximum Pressure	1,700 PSI	12 mPa
Cylinder (Bore/Rod) (2)	6"/2.5"	152mm/63.5mm
Stroke	56"	1422mm
Structural
Charge Box Sides	3/16"	4.8 mm
Charge Box Floor	3/8"	9.5 mm
Ram Face	1/2"	12.7 mm
Ram Bottom	3/8"	9.5 mm
Ram Top	1/4"	6.3 mm
Breaker Bar (structural angle)	6 x 8 x 3/4"	152x203x19mm
Weight	4,150 lbs	1882kg