The Bes-Pac BPE-235 features the 2.0 cubic yard compactor and 33 cubic yard container.  The unit is liquid tight to a level of 42" above the container floor.

The unit's liquid retention makes it the ideal choice for hotels, hospitals, restaurants, shopping malls or any other facility where waste volume is high and liquids are present.

 

The Bes-Pac BPE-235's packing head and holding container are permanently attached to the rigid understructure resulting in exceptional structural integrity.

 

 

Standard Features

• Hydraulic connections rigidly piped to both sides
• Each BP unit is fully water tested prior to shipment
• Double End Pick-up
• 10" Sump
• Full Door Seal
• Tri-voltage Transformer
• Bustle Door aids in compaction and increases capacity
• 4 heavy duty slotted hinges
• Seal mounted on door prevents refuse from being dumped over seal during the dump cycle
• Auto safety latch aids in door closure
• 3-point closure assures secure latching of door

Options

• Container Full Light
• Deadman Controls
• Oil Heaters
• Multi-Cycle Timer
• Fabricated Options
• Doghouse, Hoppers, Chute, etc

 

	Standard Size	Metric Size
Specifications
MFG Rating	2 yd3	1.52 m3
WASTEC Rating	1.61 yd3	1.20 m3
Clear top opening (L x W)	42 x 57.5"	1066 mm x 1460 mm
Ground Height	52"	1320 mm
Capacity per Hour	175 yd3	133 m3
Performance
Cycle Time	33 sec.	33 sec.
Normal Force	38,000 lbs	169 kN
Maximum Force	38,000 lbs	169 kN
Normal Ram Face Pressure	21.1 PSI	145 kPa
Maximum Ram Face Pressure	21.1 PSI	145 kPa
Ram Penetration	11"	279 mm
Electrical
Motor	10 HP	7.5 kW
Control Voltage	120 VAC	120 VAC
UL Label All Circuits Fused, Keylock, Start, Stop, and Reverse
Hydraulic
Pump	11.5 GPM	43 Lpm
Normal System Pressure	1,800 PSI	13 mPa
Maximum Pressure	1,800 PSI	13 mPa
Structural
Charge Box Sides	3/16"	4.8 mm
Ram Face	1/2"	12.7 mm
Ram Top	1/4"	6.3 mm
Ram Sides	3/16"	4.8 mm
Ram Bottom	3/8"	9.5 mm
Charging Chamber Floor	3/8"	9.5 mm
Breaker Bar	ERROR MSG8 x 6 x 3/4"	ERROR MSG203 x 152 x 19 mm
Container	10 ga	3.4 mm
Weight	9600 lbs.	4354 Kg