The Bes-Pac BP-235 features the 2.0 cubic yard compactor and 33 cubic yard container. The unit is liquid tight to a level of 42" above the container floor.

This unit's liquid retention makes it the ideal choice for hotels, hospitals, restaurants, shopping malls or any other facility where waste volume is high and liquids are present.

The Bes-Pac BP-235's packing head and holding container are permanently attached to the rigid understructure resulting in exceptional structural integrity.

 

 

Standard Features

• Double End Pick-up
• 12" Sump
• Full Door Seal
• Tri-voltage Transformer
• Constructed of CQ Prime Hot Rolled Steel
• Remote Power Unit
• Pressure Gauge
• Controls in Panel Box Face
• Compactor Clean-Out
• Bustle Door
• 1/4" Packer Sides
• Replaceable UHMW Ram Guides

Options

• Container Full Light
• Deadman Controls
• Oil Heaters
• Multi-Cycle Timer
• Fabricated Options
• Doghouse, Hoppers, Chute, etc

 

	Standard Size	Metric Size
Specifications
MFG Rating	2 yd3	1.52 m3
WASTEC Rating	1.61 yd3	1.2 m3
Clear top opening (L x W)	42 x 57.5"	1066 mm x 1460 mm
Ground Height	52"	1320 mm
Capacity per Hour	175 yd3	133 m3
Performance
Cycle Time	33 sec.	33 sec.
Normal Force	38,000 lbs	169 kN
Maximum Force	38,000 lbs	169 kN
Normal Ram Face Pressure	21.1 PSI	145 kPa
Maximum Ram Face Pressure	21.1 PSI	145 kPa
Ram Penetration	11"	279 mm
Electrical
Motor	10 HP	7.5 kW
Control Voltage	120 VAC	120 VAC
UL Label All Circuits Fused, Keylock, Start, Stop, and Reverse
Hydraulic
Pump	11.5 GPM	43 Lpm
Normal System Pressure	1,800 PSI	13 mPa
Maximum Pressure	1,800 PSI	13 mPa
Structural
Ram Face	5/8"	15.8 mm
Ram Top	1/4"	6.3 mm
Ram Sides	3/16"	4.8 mm
Ram Bottom	3/8"	9.5 mm
Charge Box Floor	3/8"	9.5 mm
Breaker Bar (structural angle)	8 x 6 x 3/4"	203 x 152 x 19 mm