Bes-Pac has made it unnecessary to struggle with messy, expensive and time-consuming methods of gathering refuse and preparing it for pickup.  The SLUGGER compactor is so efficient and inexpensive that it actually revolutionizes refuse handling in both small and large operations.

The SLUGGER's refuse inlet permits fast and easy feeding of large sizes and amounts of refuse, assuring easy to clean, sanitary operation.   The compactor is mounted on four heavy duty casters allowing easy moving for cleaning underneath the unit.  SLUGGER's power pack has no solenoid valves with coils to burn out or pressure valves to adjust.  Available with swing out barrel or roll away cart.

Specifications

General Features

• Size: 25" wide x 35" deep x 76 1/2" high
• Weight:  Approx. 950 lbs.
• In-feed Opening:  22" in diameter
• Compaction container size:   34" high x 22" diameter, has 7.25 cubic foot capacity

Structure

• Upright, rigid D-frame configuration
• Heavy steel base integrally welded
• Upright column is 6" x 8" x 3/16" steel tubing
• Nickel plated corrosion-resistant compacting ram
• 10 gauge steel compaction container, opens on hinges
• T2 heavy duty, fast acting toggle latches and full length hinge on compaction container door
• Durable, epoxy base abrasion resistant industrial durable paint on a primed base; optional colors available.

Electro/Hydraulic System

• Motor size: 1HP totally enclosed, 14 Amp, 1725 RPM
• Electrical power requirements: 115 Volt, 60 Hz, 20 Amp single phase*
• Hydraulic drive system: Integral hydraulic power pack
• Compaction force:  14,000 lbs., 70 PSI ram face pressure
• Compactio force ratio: Up to 10:1
• Cycle time:  average of 30 sec

*MUST BE ON DEDICATED 20 AMP ELECTRIC SERVICE

Options

• Reusable barrels:  Heavy-gauge, high strength polyethelene barrel.  Eliminates cost of disposable plastic bags.
• Slugger ram enclosure
• Satellite carts: To handle multiple waste generating locations

Features

• Swing-out compaction container or roll away carts available
• In swing-out models the container is swung out from under ram. Thus, container may be loaded directly from above using the full 22" diameter opening.
• The cart model allows loading at any remote location.
• Deep penetrating ram
• Each compactor supplied with a heavy gauge reusable bag liner and drip pan for liquid containment and prevention of bag punctures
• Large in-feed [approx. size of 55 gal. drum]
• Compacted bag weight adjustable from 50 to 150 lbs.
• Safety features include emergency stop switch and key switch controls

• Compaction container opens on hinges for easy and fast removal.

Safety Features

• Minimum number of controls for easy operator training
• Key switch controls; prevents unauthorized operation [Off, Run, and Start positions]
• Emergency stop switch
• Interlock switch: unit will not run if barrel is not in position
• Components UL approved.