Bes-Pac Home tomorrow's technology today
Parts Room Customer Service Waste Equipment Financing Meet Bes-Pac Get a Quote! FAQ
Frontload Containers
Roll-off Containers
Recycling Containers
Balers
Self-Contained Compactors
Stationary Compactors
Special Application Compactors
Lugger
Roll-off Hoist
 
 
rectangular receiver container            

 
Rectangular Receiver Container

Bes-Pac's Rectangular Receiver Containers are built with the highest quality materials and tapered gussetting to allow smooth dumping operations.  Each container is engineered to be compatible with most major brand compactors and roll-off hoist systems.

 

Capacity Length Width Height Ground Height
40 YD 265 1/8" 92 3/16" 98 3/8" 12"
42 YD 265 1/8" 92 3/16" 103 3/4" 12"

 
 

Standard Features

  • Heavy Duty Rear Hinges with grease fittings
  • Compatible with Most Major Brand Roll-off Hoist Systems
  • Primed and Finish Painted
  • Door openings to Fit Most Major Brand Stationary Compactors
  • Solid Steel Bullnose Added to the Front of the Longsills to Prevent Impact Damage

Construction

Floor material: 7 ga. H.R.
Side Walls: 12 ga. H.R.
Roof material: 12 ga. H.R. w/ 3" x 5" formed channel supports on 24" spacing
Vertical Side Ribs: 3" x 5 1/2" formed channel supports on 24" spacing
Rails / Long Sills: 2" x 6" x 3/16" wall tubing with 1 3/8" solid steel bullnose
Floor Joists / Cross Members: 3" channel @ 4.1 lb./ft on 24" centers
Hook Assembly: 1 1/4" thick x 12 5/16" long pull hook continuously welded to 1/2" pull plate, container floor, and 2 front crossmembers
Rear Door: 12 ga. with formed and structural channel reinforcements
Hinge: 3 piece heavy duty
Door Opening: 48" high x 64" wide (standard)
Paint: Primer & finish coat exterior. (Interior primer by request, only)
Ground Rollers: (2) 6" dia. x 10" long with grease fittings
Claw Hook-up: 1/2" plate reinforced

 

 
1909 East Main Street
Easley, SC 29640
 (864) 859-6030 | (800) 726-1439
info@bes-pac.com
- | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |