| | | octagon receiver container | |
 | Bes-Pac Octagon Receiver Containers are designed and built to maximize your compaction efforts and minimize your costs. Bes-Pac uses 7 ga. HR steel in the floor, sides and roof areas. Supports are structural channel tubing and angle. The ORC series are built to perform long term with minimal maintenance costs. |
|
| Capacity | Length | Width | Height | Ground Height | | 34 YD | 20' 4" | 94 5/16" | 104 3/8" | 12" | | 40 YD | 22' 9 1/8" | 94 5/16" | 104 3/8" | 12" | | 42 YD | 24' 4" | 94 5/16" | 104 3/8" | 12" | |
Standard Features - Heavy Duty Rear Hinges with grease fittings
- Door retaining chain
- Compatible with Most Major Brand Roll-off Hoist Systems
- Primed and Finish Painted
- Door openings to Fit Most Major Brand Stationary Compactors
- Solid Steel Bullnose Added to the Front of the Longsills to Prevent Impact Damage
Construction | Floor material: | | 7 ga. H.R. | | Side Walls: | | 7 ga. H.R. | | Roof material: | | 10 ga. H.R. | | Rails / Long Sills: | | 2" x 6" x 3/16" wall tubing with 1 3/8" solid steel bullnose | | Floor Joists / Cross Members: | | 3" channel @ 3.5 lb./ft | | Hook Assembly: | | 1 1/4" thick x 12 5/16" long pull hook continuously welded to 1/2" pull plate, container floor, and 3 front crossmembers | | Rub Rail: | | 3" structural angle | | Rear Door: | | 10 ga. with 3" x 5 1/2" formed channel | | Hinge: | | 3 piece heavy duty | | Door Opening: | | 48" high x 64" wide (standard) | | Paint: | | Primer & finish coat exterior. (Interior primer by request, only) | | Door Latch: | | Vertical 3 point latch | | Ground Rollers: | | (2) 6" dia. x 10" long with grease fittings | | Compactor Hook-up: | | 1/2" plate reinforced |
|
|
1909 East Main Street
Easley, SC 29640
(864) 859-6030 | (800) 726-1439
info@bes-pac.com
 |
