Bes-Pac’s diverse manufacturing capabilities allow us to manufacture roll-off containers for most any application. From "Tub" Style open tops through Compactor Receiver Containers, Bes-Pac has the Roll-Off Container for your needs.

Bes-Pac Front Loader Containers are built rugged by design.

Standard Construction

• 7 ga. Sleeves
• No Step Sleeve Gussets
• 3/16" Hinge Brackets
• Bumper Pads with "V" Crimp
• Top Perimeter Reinforcements - Structural Tubing & Angle
• 1/2" Hinge Rod
• All Inside Seams Continuous Mig Welded
• Double Wall Plastic Lids

Heavy Duty Construction

• Heavy Duty Models Incorporate 7 ga. Bottoms and 10 ga. Sides
• 2-3 yd. Utilize All 10 ga.

Features

• 10 & 12 ga. HR Steel Construction
• "V" Crimps for Added Strength and Rigidity
• Watertight Construction
• Drain Holes with Plugs
• Primer on Interior and Exterior
• Exterior Paint High Solids Enamel

Options

• H.D. Casters 2YD-4YD
• Plastic Side Doors 6 YD & 8 YD

Every Bes-Pac container is constructed with CQ prime steel. All inside seams are continuous with 3/16" filet welds, 3" high bottom channels and 1.5 mils of industrial alkyd enamel top coat assure years of service from Bes-Pac roll-offcontainers.